The XV70 Camry’s trunk lid profile is flat. On models that left the factory without a spoiler, the rear of the car reads as an unfinished sedan silhouette. Even the factory SE and XSE lip spoiler, while clean, sits low and adds minimal visual presence. The Yofer V2 duckbill changes the rear roofline reading substantially — the high-kick trailing edge is the defining feature and the reason this specific spoiler has become the most recognised aftermarket trunk upgrade for this generation Camry.
Duckbill profile and V2 design
A duckbill spoiler profile means the lip curves upward at the trailing edge rather than lying flat across the trunk. On the V2, this kick angle is steeper than on the original Yofer version, producing a more aggressive stance when viewed from the rear quarter. The end caps taper to a point at each corner, which extends the visual width of the trunk and sharpens the overall shape. At 128 cm wide and 8 cm tall at the highest point, the spoiler is proportioned to the Camry’s body width rather than being an exaggerated wing — it looks like a factory sport option rather than an aftermarket addition.
Material and finish
The spoiler is moulded from ABS plastic and arrives pre-painted. The available finishes are glossy black and carbon fiber look. The glossy black finish is a painted surface, not a vinyl wrap. The paint is aftermarket — it is not a Toyota factory color code match. On glossy black Camry variants the match is visually close under most lighting. On other body colors, most buyers paint-match locally after fitment, or run the spoiler as a contrasting gloss black accent. The carbon fiber look variant uses a textured ABS surface treatment rather than real carbon fiber composite.
The spoiler weighs approximately 2 kg, which is consistent with ABS trunk spoilers of this size.
Fitment details by trim
This spoiler fits every XV70 Camry sold from 2018 to 2022 regardless of trim level, with specific notes depending on your variant.
If your Camry is a base L, LE, XLE, or hybrid variant without a factory trunk spoiler, this spoiler installs directly onto the clean trunk lid using double-sided adhesive tape. No holes are drilled, no clips are required.
If your Camry is an SE or XSE that came with the factory low-profile lip spoiler, remove the factory spoiler first. The mounting holes left behind by the factory spoiler will be covered by the footprint of this duckbill. No filler or bodywork is needed.
If your Camry is the TRD trim, the factory TRD spoiler must be removed before fitting this unit. The TRD spoiler uses different anchor points and the duckbill may not fully cover the TRD mounting holes. This is a confirmed fitment limitation disclosed by the manufacturer. TRD owners should assess the hole positions on their specific car before ordering.
This spoiler does not fit the 2023 or later Camry, nor the XV80 generation Camry from 2024 onward. The trunk lid shape changed with those updates.
Installation
The spoiler attaches via double-sided adhesive tape. Professional installation is recommended for permanent fitment. For a clean result: clean the trunk lid thoroughly with isopropyl alcohol to remove wax, polish, and contaminant residue. Dry fit the spoiler first to confirm positioning and mark alignment. Apply 3M automotive-grade double-sided tape to the spoiler base. Press firmly and hold for at least 60 seconds. Allow 24 hours cure time before driving at highway speeds. No drilling, no bolts, and no damage to the trunk lid if removed carefully.
No installation instructions are included with the spoiler.
Specifications
| Detail | Value |
|---|---|
| Fitment | 2018 to 2022 Toyota Camry XV70, all models |
| Material | ABS plastic, pre-painted |
| Finish options | Glossy black / Carbon fiber look |
| Dimensions | 128 cm L x 34 cm W x 8 cm H |
| Weight | Approximately 2 kg |
| Attachment | Double-sided adhesive tape |
| Includes | 1 x duckbill spoiler |
| Paint | Aftermarket finish, not factory color match |
| Origin | Mainland China |
Frequently Asked Questions
Will this fit my 2022 Camry XSE with the factory spoiler? Yes. Remove the factory XSE lip spoiler. The mounting holes it leaves behind are covered by the base of this duckbill. The fit is confirmed for XSE and SE factory spoiler footprints.
Does this fit the 2023 Camry? No. The 2023 model year Camry uses a revised trunk lid profile. This spoiler is designed and tooled for the 2018 to 2022 XV70 generation only.
Is the carbon fiber look option real carbon fiber? No. It is a textured ABS surface that replicates the appearance of a carbon weave pattern. Real dry-carbon spoilers for the Camry exist but are priced significantly higher. For a visual carbon accent without the cost or fragility of real carbon composite, the pattern finish option is a practical alternative.
