Transform your Kia Sportage NQ5 interior with this precision-moulded ABS dashboard frame cover. Designed exclusively for the 2025–2026 NQ5 Facelift (PE), left-hand drive variants. Available in three finishes: Glossy Carbon, Matte Wood, and Glossy Red. Two-piece set with peel-and-paste adhesive installation — no tools, no drilling required.
Specifications
- Compatible Vehicle: Kia Sportage NQ5 2025–2026
- Drive Side: Left-Hand Drive (LHD) only
- Fitment Variant: NQ5 Facelift (PE)
- Required Display: 12.3-inch full-size TFT LCD colour display
- Material: ABS Plastic (Acrylonitrile Butadiene Styrene)
- Pieces Included: 2 (main dashboard strip + accent piece)
- Installation Method: Peel-and-paste adhesive
- Installation Position: Instrument panel / dashboard frame surround
- Origin: Mainland China
- SKU / Colour Code: 23902
Compatibility Notice
This trim kit fits the Kia Sportage NQ5 Facelift (PE) 2025 and 2026, left-hand drive only, equipped with the 12.3-inch full-size TFT LCD colour display. It does not fit vehicles with the standard 12.3-inch display audio (non-TFT) unit. Country-specific variants may differ — compare your dashboard configuration against product images before ordering.
Available Finishes
Glossy Carbon — Woven carbon-fibre pattern with a high-gloss lacquer coat. Adds a performance-oriented aesthetic to the cabin interior. The weave texture is visible and pronounced under interior lighting.
Matte Wood — Dark matte wood grain with a premium soft-coat finish. Subdued and refined, it pairs naturally with the Sportage NQ5’s standard interior tones for a factory-upgrade appearance.
Glossy Red — High-gloss piano red running the full width of the instrument panel. Bold contrast accent that dramatically transforms the cabin atmosphere with a sport-trim aesthetic.
Installation
- Verify fitment — Confirm your vehicle is a Kia Sportage NQ5 Facelift 2025–2026 LHD with the 12.3-inch TFT LCD display.
- Clean surface — Wipe the dashboard frame area with isopropyl alcohol to remove dust, grease, and residue. Allow to dry fully.
- Dry fit — Test-fit both pieces without removing the adhesive backing to confirm alignment and coverage.
- Peel and press — Remove the backing, align carefully, and press firmly from the centre outward. Apply sustained pressure for 30 seconds across the full length.
Total installation time: under 30 minutes.
Frequently Asked Questions
Which Kia Sportage models does this fit? This trim kit is designed exclusively for the Kia Sportage NQ5 Facelift (PE) 2025 and 2026, left-hand drive variants, fitted with the 12.3-inch full-size TFT LCD colour display. It is not compatible with the 12.3-inch display audio (non-TFT) version, the pre-facelift NQ5, or right-hand drive configurations.
Is the installation reversible? The adhesive is strong but removable. Apply gentle heat from a hair dryer or heat gun, then peel slowly from one end. Remove any residual adhesive with an isopropyl alcohol wipe.
How many pieces are included? Two pieces: a main long dashboard frame strip and a smaller secondary accent piece, covering the full instrument panel surround beneath the screen.
What material is used? ABS (Acrylonitrile Butadiene Styrene) plastic — standard automotive interior grade. Lightweight, rigid, and resistant to warping under typical cabin temperatures.
Does this fit the Sportage Hybrid or PHEV? Hybrid and PHEV variants may have different dashboard or console configurations. Verify your interior matches the standard NQ5 Facelift layout with the 12.3-inch TFT LCD before purchasing.
Will this affect airbags or HVAC vents? The trim covers only the decorative instrument panel frame surround below the infotainment display. It does not cover airbag deployment zones or HVAC vent openings.
