This is a complete LED tail light assembly set designed to replace the factory halogen or early-LED tail lights on the 2013 to 2020 Audi A3 sedan. The upgrade delivers a modern, high-contrast light signature that visually aligns the pre-facelift A3 with later model-year styling: sharper line elements, stronger LED brightness, and a more defined rear presence at night or in low visibility. Every function is integrated into the new assembly: running lights, brake lights, turn signals, reversing lights, and fog lights all operate through the replacement units. The connector is designed to mate with the existing vehicle harness on compatible variants, eliminating the need for wiring fabrication. This is not a lens tint or overlay. It is a full housing replacement.
Note: This is an aftermarket part, not an OEM Audi component.
Key Features and Benefits
- Full-function LED replacement covering running light, turn signal, brake light, reversing light, and fog light in a single assembly
- Significantly higher light output than factory halogen units, relevant for brake and DRL visibility in traffic
- Modernised turn signal operation replacing the standard bulb indicator
- Housing geometry matches the factory tail light recess with no panel modification required on compatible variants
- Connector plug designed for direct fitment on compatible A3 sedan builds; confirm plug type before purchase (see installation warning below)
- Transforms the rear aesthetic of 2013 to 2016 halogen-equipped A3 sedans to match the updated LED-tailed appearance of later variants
- Certified to CCC, CE, DOT, and EMARK standards, meeting road-use requirements across multiple markets
- Dual voltage compatibility operating on both 12V and 24V systems
- Ships as a pair in foam-lined packaging with both driver and passenger side assemblies included
- Model-specific variants available for 2013 to 2016 halogen, 2013 to 2016 LED, and 2017 to 2020 LED equipped sedans; correct variant must be selected at time of order
Material, Finish and Colour Options
Material: ABS housing with polished lens cover and LED internal light bar assemblies
Finish: Gloss red and clear lens with dark inner housing in OEM-matched lens colouring
Colour Options: Red and clear standard finish (single option; no smoked variant listed)
Vehicle Compatibility and Model Years
Compatible Vehicles: Sedan (4-Door) Body Style Only
Audi A3 Sedan 2013 to 2016 with factory halogen tail lights Audi A3 Sedan 2013 to 2016 with factory LED tail lights Audi A3 Sedan 2017 to 2020 with factory LED tail lights
Critical Exclusion Note: Plug connector type varies between model years and production runs. The halogen and LED variants use different connectors. Purchasing the wrong variant will result in a connector mismatch that prevents installation. Confirm your existing tail light plug configuration before ordering. If uncertain, photograph your existing plug and submit to the seller for confirmation prior to purchase. Some 2013 to 2016 halogen-equipped models also require an additional wiring harness connection to activate the inner tail light turn signal function.
Not compatible with: A3 Sportback (5-door), A3 Cabriolet, or any A3 generation other than the 8V (2013 to 2020) sedan platform.
Dimensions and Technical Details
- Voltage: 12V and 24V dual compatibility
- Wattage: 36W
- Weight: 6.5 kg (set)
- Model number: 2025-S-562
- Certifications: CCC, CE, DOT, EMARK
- High-concern chemicals: None declared
- Quantity: Sold as a pair (left and right assemblies)
- Packaging: Individual foam-lined protective carton
Installation Notes and Special Functions
These units are designed as a direct plug-in replacement on compatible variants. Remove the existing tail light assembly, disconnect the factory plug, connect the new unit to the same plug, and secure into the housing cavity. No cutting, splicing, or rewiring is required on plug-compatible builds. On A3 sedan models originally equipped with halogen tail lights, an additional wiring harness connection may be required to enable the inner tail light turn signal function. This is a documented requirement for those builds due to the halogen harness not carrying a dedicated inner turn signal wire. Professional installation is recommended for buyers unfamiliar with automotive lighting removal and connector identification. Verify plug type against your existing assembly before beginning installation. The seller accepts no responsibility for fitment issues resulting from plug incompatibility when the buyer has not confirmed compatibility prior to purchase.
