This four piece side skirt body kit is designed exclusively for the BMW 3 Series F30 four door sedan produced between 2012 and 2019. The kit fits along the lower rocker panel on both sides of the vehicle, extending the visual width of the body and lowering the overall stance without any cutting or permanent modification to the factory bodywork. Each piece is moulded from rigid ABS plastic and arrives with a pre finished painted surface in your choice of Matte Black, Glossy Black, or Carbon Fibre Look. The kit spans 204 cm across each full side length and follows the F30 body contour precisely, producing a clean integrated appearance that complements both standard and M Sport trim levels. The rear installation face of each panel is the bonding area and does not require painting or additional finishing before fitment.
Key Features and Benefits
A complete four piece kit covering the full rocker panel length on both sides of the F30 sedan. Each kit contains all components needed to complete the left and right side skirt installation in a single purchase, removing the need to source individual pieces separately.
At 204 cm per side, the skirt length covers the full door sill span of the F30 body from the front wheel arch to the rear wheel arch. This produces a continuous low profile extension that visually drops the ride height and widens the car’s stance from any viewing angle.
Moulded from rigid ABS thermoplastic. The material resists road debris impact, stone chips, and UV degradation across the full range of Australian climate conditions. The ABS construction holds its shape under heat load and does not flex or vibrate at speed once secured to the body.
Three finish options allow buyers to match the skirts to their existing trim colour scheme or to create a deliberate two tone contrast. The Carbon Fibre Look option is suited to vehicles that already carry carbon or gloss black exterior accents, while the Matte Black finish coordinates with stealth or blacked out build styles.
The back face of each panel is the installation area as produced. Minor surface variations on the bonding face are a normal characteristic of the manufacturing process for this product type and do not affect installation accuracy or final appearance from the exterior.
No modification to the factory bodywork is required. The skirts mount to the existing sill geometry of the F30 sedan body without drilling through painted panels or altering any structural components.
Material, Finish and Colour Options
Material: High quality ABS thermoplastic
Finish: Pre painted, ready to fit directly from packaging
Colour Options: Matte Black, Glossy Black, Carbon Fibre Look
Vehicle Compatibility and Model Years
Compatible Vehicles:
BMW 3 Series F30 4 Door Sedan 2012 to 2019
Confirmed model variants: 318i, 320i, 330i, 340i
Compatible production years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Exclusions: This kit is not compatible with the BMW F31 Touring wagon, F32 Coupe, F33 Convertible, or F36 Gran Coupe body styles. It does not fit the G20 generation 3 Series (2019 onward). Buyers must confirm their vehicle is the F30 four door sedan body code before purchasing. Verify your exact body code against your compliance plate prior to ordering.
Dimensions and Technical Details
Item Type: Side skirt body kit, lower rocker panel extensions
Package Contents: 4 pieces (left front, left rear, right front, right rear panels)
Side Length: 204 cm (80.3 inches) per full side
Material: ABS plastic, rigid moulded construction
Surface: Pre painted exterior face, installation area on rear face does not require additional finishing
Placement: Lower exterior body, both sides of vehicle along the door sill
Note: Allow a measurement tolerance of 1 to 3 cm due to manual measurement variance. Screen calibration and ambient lighting conditions may produce minor colour perception differences compared to the finished panels viewed on the vehicle in natural light.
Installation Notes and Special Functions
Dry fit all four panels before committing to any adhesive application. Position each panel against the sill and confirm alignment with the wheel arch edges at both ends before bonding. Mark the correct position with removable tape if needed.
Thoroughly clean and degrease the mounting surface on the vehicle sill using an isopropyl alcohol wipe before applying any adhesive. Remove all wax, polish, and road film from the bonding area and allow the surface to dry completely.
The rear face of each panel is the designated installation area. Do not attempt to paint, sand, or otherwise process this surface as it is engineered to accept bonding directly as supplied.
Professional installation is strongly recommended. The F30 sill geometry requires precise panel alignment across a 204 cm span to achieve a consistent gap line and flush fit at both wheel arch termination points. Errors in positioning at this length are difficult to correct once adhesive has cured.
Do not drive the vehicle until all panels are fully bonded and adhesive has reached complete cure strength per the adhesive manufacturer’s specified curing time.
